The microprocessor central unit is usable for big industrial applications and it is arranged to operate matched with remote units type CE380UR which manage 8 sensors each. On the CE700 it is possible to connect max 23 remote units for a total of 184 detectors and relays (with ES480UR boards).Considering 16 inputs and 16 relays available directly in central through specific expansion boards, the total is of 200 detectors and 200 relays available. CE700 central units are available both in wall and in rack versions.
**compatible to sensors Series SE and TS for toxic, inflammable gases and oxygen, also simultaneously
**Serial door with MODBUS RTU protocol, with bidirectional **communication for overvision
**Backlit display 2 rows x 40 characters
**999-event memory
Power supply: 230Vac 50-60Hz
Measuring range: Programmabile
Alarm intervention: 3 programmabiles
Inputs: N° 200 max
Output: N° 200 relè max
Capacity: 3A (1A) SPDT 230Vac
Expansion board for 8 inputs sensor
for CE700P and CE700R central units.
Max. 2 boards can be installed for
each central with a total of 16 inputs.
Expansion board for 8 outputs relays
for CE700P and CE700R central units.
Max. 2 boards can be installed for
each central with a total of 16 outputs.
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Ideal control panels for medium gas detection systems, high performances. The big RGB colour back lighted display placed on the front panel allows the actual visualization in real time of all reading values of the connected sensors. Equipped by a serial RS485 door that connect until n° 2 remote units that allow to manage 8 IN and 9 OUT in central, up to 24 detectors and 25 output relays. The intuitive keyboard allows in an intuitive way to use the control panel and the programming is facilitated by the self-driving system and by the preconfiguration of our detectors.Compatible to all sensors series “SE” and “TS” with output 4-20mARS485 door to connect max. n° 2 CE380UR remote unitsEasy setup with pre-configurated list of pre-programmed detectorsConfiguration protected by a password (3 safety levels)AND, OR and PARKING (DM 1/2/86 o EN50545-1) logical operation usable in zones“RESET” functionLast events visualized on the display (100)Operation/Working visualization with backlighting displayClock with automatic daylight saving timeCheck inputs/outputs boards presenceSD Card for:
- Firmware updating
- data logger
- programming backupN° 2 batteries of 12V 1,3 Ah can be setting
Ideal control panels for small gas detection systems, high performances. The big back lighted display placed on the front panel allows the actual visualization in real time of all reading values of the connected sensors. Equipped by 4 inputs and 5 relays, expandable up 8 detectors and 9 outputs relays through specific expansion boards. The intuitive keyboard allows in an intuitive way to use the control panel and the programming is facilitated by the self-driving system and by the pre-configuration of our detectors.Compatible to all sensors series “SE” and “TS” with output 4-20mAEasy setup with pre-configurated list of pre-programmed detectorsConfiguration protected by a password (3 safety levels)AND, OR and PARKING (DM 1/2/86 o EN50545-1), logical operation usable in zones“RESET” functionLast events visualized on the display (100)Operation/Working visualization with Yellow, Green, Red LEDClock with automatic daylight saving timeCheck inputs/outputs boards presenceFirmware updating by SD-CardN° 2 batteries of 12V 1,3 Ah can be setting
**Power Supply: 230Vac
**Inputs: max 24 detectors (4 installed expandable to 24 with n° 1 ES404 and n° 2 CE380UR)
**Logical inputs: max 1
**Output relay: max 25 (5 installed expandable to 25 with n° 1 ES414 and n° 2 CE380UR)
**Capacity replay: 3A (resistives) SPDT 230Vac
**Alarm levels: 3 programmable levels + fault, level programmable in zone
**Dimensions: 285(l)x230(h)x140(p) mm
**IP40
Power Supply: 230VacInputs: max 8 detectors (4 installed expandable to 8 with ES404 board)
Logical inputs: 1 for an immediate alarm (ex. button)
Output relay: max 9 (5 installed expandable to 9 with ES414 board)
Capacity replay: 3A (resistives) SPDT 230Vac
Alarm levels: 3 programmable levels + fault, level programmable in zone
Dimensions: 285(l)x230(h)x140(p) mm
IP40
ES404: board with 4 inputs 4-20 mA sensors (max 1)
ES414: board with 4 output relais (max 1)
External unit to be connected to CE700, equipped with 8 inputs for transmitters with 4÷20mA signal.
The unit is equipped with:
*case
*8-input card
*Power supply card
*Feed card - Communication card RS485
*Arranged for battery 12V.3Ah
Power supply: 230Vac 50-60Hz - Installation: Wall
Input signal: 4÷20mA
Inputs for transmitters: 8
Size: 290x220x80
IP54
The central panels are equipped with three led bars that indicate the reached gas
concentration, The green led indicates fresh air, the first and second red leds indicate
pollution and the third and fourth red leds indicate the switching on of the alarm relay.
The yellow led indicate an anomaly of the system and it operate on the fault relay.
Power supply: 230Vac 50-60Hz 24Vcc
Installation: Wall
Absorption: 10 VA
Alarm level: 10% LIE - 20% LEL - Measuring range: 0÷20% LEL
N° 3 safety positive relay with alarm memory for all sensors
A led bar indicate the reached gas concentration;1 for each sensor
IP54
STANDARD SPECIFICATIONS
**Power supply: 230Vca 50-60Hz - 12Vdc
**Absorption: 9VA – 230V / 6W – 12Vdc
**Sound intensity: 115db
**Installation: Wall
**Protection: IP43