You are at the right place!This video gives you a not too technical understanding of valves for piping (oil & gas), to be more comfortable when discussing the topic with suppliers or technical counterparts:- What is valve?
- Types of valves: gate, globe, check, ball, butterfly, plug, pinch, control
- Functions of valves
- Dimensions of valves ASME B16.10
- Cast and forged materials for valves
Any comment is welcome!
RegO® Globe and Angle Valves are designed and manufactured especially to meet the rigid requirements of the LP-Gas industry. The high quality construction and wide variety of sizes and styles also make them highly suited to many other industries such as anhydrous ammonia, chemical and petrochemical.
Containers and pipe lines should be thoroughly cleaned before globe and angle valves are installed. Large particles of solid foreign matter can permanently damage the seating surface in the valve body, causing the valve to leak. Use a minimum amount of a suitable pipe dope on the male connecting threads as excess amounts may fall off and be carried into the valve, causing damage to the seat or other operating parts.
*Heavy Duty Handwheelprovides easy operation.
*O-Ring Wiper keeps sand and grit away from pressure seal and stem threads.
*Heavy Duty ACME Threadsfor quick action and smoothoperation.
*Swivel Seat Holderpromotes long life.
*Synthetic Rubber Seatassures easy, positiveshut-off.
Teflon “V”-RingSpring-Loaded Pressure Seal for leak-proof operation. No packing to adjust or replace.
*Stainless Steel Stem is centerless ground to provide a smooth sealing surface.
*Rugged Ductile Iron Bodywon’t crack or fracture from wrenching, dropping or hammer blows.
*Circular Bridge is contoured to provide extra high capacity and low pressure drop.
Browse through our collection of stunning images
**RUBVALVES – STANDARD LEVER TYPE
1 - S95D41 BALL VALVE S.95 1/2'' FIP-FIP 80
2 - S95E41 BALL VALVE S.95 3/4'' FIP-FIP 48
3 - S95F41 BALL VALVE S.95 1'' FIP-FIP 40
4 - S95G41 BALL VALVE S.95 1.1/4 FIP-FIP 16
5 - S95H41 BALL VALVE S.95 1.1/2 FIP-FIP 12
6 - S95I41 BALL VALVE S.95 2'' FIP-FIP 8
7 - S95D46 BALL VALVE S.95 1/2'' 80
8 - S95E46 BALL VALVE S.95 3/4'' 48
9 - S95F46 BALL VALVE S.95 1'' 40
10 - S95G46 BALL VALVE S.95 1.1/4 16
11 - S95H46 BALL VALVE S.95 1.1/2 12
12 - S95I46 BALL VALVE S.95 2'' 8
•24h 100% seal test guaranteed•
•Dual sealing system allows valve to be operated in either direction making installation easier
• No metal-to-metal moving parts•
•No maintenance ever required•
•Handle clearly shows ballposition•
•Silicone-free lubricant on allseals•
•Chrome plated brass ball for longer life•
•Handle stops on body to avoid stresses at stem
•Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
•WARNING: do not exceed reasonable temperature and/or electrical load
•Handle removable with valve in service
Working pressure and temperature:•
.600 PSI up to 2”, 450 PSI over 2” non-shock cold working pressure
• -40°F / +350°F•
WARNING: freezing of the fluid in the installation may severely damage the valve
•Blowout-proof nickel plated brass stem
• Two FPM O-rings at the stem for maximum safety
Threads:NPT taper ANSI B.1.20.1 female by female threads
•Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
•Finest brass according to EN 12165 and EN12164 (formerly DIN 17660 and UNI 5705-65) specifications